Home > HARDWARE > GENERAL HARDWARE > SHELVING & CLOSET > VENTILATED SHELVING MOUNTING
Sort By:
1
BRACKET WALL HD PRE-LOADED WHT BRACKET CONVERSION UNIV RESIN CONNECTOR HANGER BAR PLASTIC
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed mount and ShelfTrack? mounting systems. The heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of the SuperSlide shelf and hang rod. Converts shelf and rod shelving, 12 in and 16 in deep, to a continuous slide. Just add the brackets and choose your length of ClosetMaid? hang rod. Hang rod snaps into bracket to create an continuous slide for hangers. Use with SuperSlide? shelving to create uninterrupted sliding action, even around corners for walk-in closets.
BRKT SUPP CNR WHT VNYL        FOR BRACKET SHELF SUPPORT12"  BRKT END W/ANCH 2/PK WHT
Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap-in place design. For corner installations. Measures 3/8 in H x 5 in W x 3/4 in D. Steel construction with epoxy-coated finish. ClosetMaid Support Bracket, 12 in Length, 2 in Width, 2 in Height, White, Steel, Includes: (2) Brackets, (2) Anchors, (2) #8 Pins Supports low-profile SuperSlide? shelving in a wall to wall installation. Includes (2) wall brackets, (4) pins and (4) anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Supports front lip of shelving where it meets the side wall. Measures 2 in H x 2.19 in W x 1-3/4 in D. Made from resin.
PLATE JOINER UNIVERSAL GREY   CLP WLL 7-CLP WHT VNYL        FOR BRACKET SHELF SUPPORT 16IN
ClosetMaid Joiner Plate, Resin, White, Bracket Mounting, Includes: (1) Bolt, (1) Nut ClosetMaid Wall Clip, White, Suitable for: ClosetMaid Wire Shelving, Includes: Pre-Loaded Pins ClosetMaid Support Bracket, 16 in Length, 2 in Width, 2 in Height, White, Steel
CLIP WALL U SHAPED BAG-12     BRACKET SHELF SUPPORT 20IN    BRKT SUPP SHLF 16IN WHT VNYL
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Shelf clip attaches to the back of shelving to secure shelf to the wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire. ClosetMaid Support Bracket, White, Steel, Includes: (1) #8 Pin, (1) Anchor Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and No 21776 for organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605 for organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
BRKT SHOE SHELFTRACK WHT EPXY CLIP WALL CONCRETE STUD RESIN BRACKET WALL W/ANCHOR BAG12
ClosetMaid Shoe Shelf Bracket, 3 in Length, White, Steel, Epoxy-Coated The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall. Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
BRKT SUPP SHLF WHT VNYL VNYL  CLIP WALL U SHAPED BAG-48     POLE SUPP SHLF 1/2X86X1/2IN
Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and No 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605. For organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth. Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Metal construction. Use in place of support brackets when stacking two or more shelves.
BRACKET WALL SIDE LOW PROFILE 12" BRACKET SHELF SUPPORT 12IN 16"BRACKET SHELF SUPPORT 16IN
Supports low-profile SuperSlide? shelving in a wall to wall installation. Includes (2) wall brackets, (4) pins and (4) anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Supports front lip of shelving where it meets the side wall. Measures 2 in H x 2.19 in W x 1-3/4 in D. Made from resin. A key component of our fixed mount system. Use a 12 in bracket for all 12 in deep shelving and all 16 in deep shelving when used for hanging clothing. Use a 16 in bracket for all 16 in deep storage shelving. Preloaded with #8 pin drive and anchors. #6606, 71925 and No 21775. For organizer, wardrobe, SuperSlide? and close mesh shelves 12 in depth and wardrobe or hanging SuperSlide? shelves 16 in depth. No 26607, 71924 and 21776. For organizer, SuperSlide? (in storage application) and close mesh shelves 16 in depth. No 26605 for organizer, wardrobe, SuperSlide? and close mesh shelves 20 in depth.
BRACKET WALL PRE-LOADED W/PIN
ClosetMaid 932 End Bracket
Our Price: $529.99
ClosetMaid End Bracket, Includes: Pins and Anchors
   
 
1