|
|
|
|
|
|
|
|
|
|
|
|
|
|
ScratchBond 8200 is a portland-cement-based scratchcoat mortar for use with metal lath on plywood subfloors and countertops prior to setting ceramic tile and stone.
|
A thin mortar bed for use as an underlayment providing a sound, stable surface for bonding ceramic tile over exterior-grade plywood. Wood surfaces must be interior only and protected from moisture.
|
Polyfilla? wall tile grout is a specially formulated water and stain repellent, ready to use grouting compound for ceramic wall tiles. Recommended for both new ceramic tiling and re-grouting applications. When dry, it forms a hard, long-lasting, waterproof joint between tiles. Polyfilla? wall tile grout is siliconized and does not require a grout sealant. It comes in either a tub for larger grouting jobs and also a squeeze tube that is convenient for smaller repair jobs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultraflex 1 is a single-component, polymer-modified, thin-set mortar for interior and exterior installations of dimensional stone, ceramic, porcelain and quarry tile. This mortar has an above-average content of a unique dry polymer, resulting in good adhesion to the substrate and tile. Ultraflex 1 can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. For exterior commercial wall applications, we recommend using either the Kerabond/Keralastic? or Granirapid? systems. Ultraflex 1 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water.
|
Do you love ceramic tile, but hate the inevitable discoloration of grout. Have you used a silicone-based grout sealer, only to find that it changes the color of your joints when you apply it. Find it too laborious to keep the sealer off the tiles to avoid a mess. Finally, do you find that no sealer you've used so far has been resistant enough. Looking for a miracle product. Surf-Pro intelligent sealer is the solution.
|
High-performance non-modified mortar for most basic tile jobs. It offers premium quality and economy, covering 10 to 20% more area than other thin sets. Its extra-long working time makes it simple to apply and adjust tile. Ultra smooth and creamy, it's very easy to trowel. For increased performance, use Custom? Building Products' thin set admix concentrate or thin set mortar admix when bonding dense tiles or setting over exterior-grade plywood, existing tile and for exterior applications. Exceeds ANSI A118.1 without additives. Exceeds ANSI A118.4 and A118.11 when mixed with thin set mortar admix.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A professional formula, all-purpose mortar, polymer modified to provide good bond strength for floor and tile projects. VersaBond? cures quickly even in cold climates and adheres to most surfaces, exceeding ANSI A118.4 and A118.11 without the need for additives.
|
Polyfilla? wall tile grout is a specially formulated water and stain repellent, ready to use grouting compound for ceramic wall tiles. Recommended for both new ceramic tiling and re-grouting applications. When dry, it forms a hard, long-lasting, waterproof joint between tiles. Polyfilla? wall tile grout is siliconized and does not require a grout sealant. It comes in either a tub for larger grouting jobs and also a squeeze tube that is convenient for smaller repair jobs.
|
Kerabond is a premium-grade, dry set mortar for use in interior/exterior residential and commercial floor and wall applications when mixed with water.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultraflex 2 is a professional-grade, single-component, high-performance, polymer-modified thin set mortar for interior and exterior installations of ceramic, porcelain and dimensional natural stone tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex 2 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. Ultraflex 2 can be used for interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors.
|
Ultraflex 2 is a professional-grade, single-component, high-performance, polymer-modified thin set mortar for interior and exterior installations of ceramic, porcelain and dimensional natural stone tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex 2 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. Ultraflex 2 can be used for interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors.
|
Polymer-modified, non-sanded Portland cement dry grout used for joints up to 1/8 in (3 mm) wide. Excellent for highly-glazed ceramic tile or highly-polished marble or natural stone that can be scratched by sanded grouts. Its non-shrinking and durable. Polymer-modified for strength, just add water.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A quick-setting, polymer-modified mortar, SpeedSet is excellent for commercial use and cold temperature installations, as well as small residential jobs and repairs. Its quick curing properties allow for grouting in as little as 3 hrs and light traffic in 4 hrs.
|
Ultraflex 2 is a professional-grade, single-component, high-performance, polymer-modified thin set mortar for interior and exterior installations of ceramic, porcelain and dimensional natural stone tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex 2 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. Ultraflex 2 can be used for interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors.
|
Ultraflex RS is a premium-grade, single-component, high-performance, polymer-modified, rapid-setting thin set mortar for interior and exterior installations of tile. This mortar has a high-content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex RS is a FastTrack Ready? product, allowing grouting in 2 to 3 hr. It can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Thanks to MAPE's High-Hydrated Cement Technology (HCT?), Ultraflex RS offers great drying-out characteristics for quick curing and does not contribute to efflorescence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides unsurpassed invisible protection for marble, stone, porcelain, quarry and Saltillo tile, grout, concrete and masonry. This long-lasting, water-based sealer actually repels dirt, oil and stains allowing for easy cleanup. Use when maximum protection is required such as in food preparation areas, floors and other high traffic areas. Can also be used in place of a grout release prior to grouting to prevent grout staining and facilitate grout cleanup. Low-odor, pH neutral and nonabrasive. Allows moisture vapor transmission. For interior and exterior use.
|
Ker 121 is a professional-grade, single-component, high-performance mortar for the installation of ceramic, marble, granite and porcelain stoneware over most traditional and specialty substrates. Ker 121 can be used for most interior residential floor and wall tile applications. In commercial applications, use on interior floor and wall installations as well as exterior floors.
|
A premium-quality, polymer-modified mortar with exceptional flexibility and bond strength for tiling difficult surfaces, such as plywood, vinyl and laminates and for hard to bond, nonporous tile, such as porcelain and glass.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ultraflex RS is a premium-grade, single-component, high-performance, polymer-modified, rapid-setting thin set mortar for interior and exterior installations of tile. This mortar has a high-content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex RS is a FastTrack Ready? product, allowing grouting in 2 to 3 hr. It can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Thanks to MAPE's High-Hydrated Cement Technology (HCT?), Ultraflex RS offers great drying-out characteristics for quick curing and does not contribute to efflorescence.
|
Mapecem Premix is a fast-setting, premixed cement-based mortar for concrete repairs and subfloor preparation work. Mixed exclusively with water, Mapecem Premix provides an easy-to-use, high-compressive-strength, fast-setting mortar that sets completely within 24 hr without shrinkage cracks. Thanks to Mapei's High-Hydrated Cement Technology (HCT?), Mapecem Premix offers great drying-out characteristics for quick curing and does not contribute to efflorescence. When properly used, Mapecem Premix will allow installation of ceramic tile and natural-stone flooring after only 3 to 4 hr and installation of floor covering after 16 to 18 hr.
|
Ultralite mortar is a premium-grade, lightweight single-component thin set mortar that can also be used for medium bed and non-sag applications. This high-performance, polymer-modified mortar is formulated with easy glide technology? for ease of application and with BioBlock? technology for mold and mildew resistance. Ultralite Mortar's unique Ultralite technology? provides twice the coverage of a standard thin set mortar and contributes to LEED points with over 20% recycled content.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A pre-mixed, ready-to-use, mild acid solution. Removes dried Portland cement grout haze and mortar residue from tile, concrete and masonry. Safe for use on colored grouts. Removes hard water deposits, efflorescence and also etches concrete.
|
The no-mix, no mess alternative to traditional grout. This sanded, shrink- and crack-resistant formula is also resistant to common household stains. SimpleGrout premixed grout is easy to use and ideal for grout restoration.
|
Prism? ultimate performance grout sets a new standard in cement-based grout technology. Prism? calcium aluminate cement-based formula offers consistent color with no shading regardless of tile type, temperature or humidity. And it will not effloresce. The rapid setting formula results in high early strength and dense joints for the highest stain resistance in grout joints up to 1/2 in. A unique blend of lightweight recycled glass and fine aggregate sand allows for a smooth consistency that is easy to spread and clean.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prism? ultimate performance grout sets a new standard in cement-based grout technology. Prism? calcium aluminate cement-based formula offers consistent color with no shading regardless of tile type, temperature or humidity. And it will not effloresce. The rapid setting formula results in high early strength and dense joints for the highest stain resistance in grout joints up to 1/2 in. A unique blend of lightweight recycled glass and fine aggregate sand allows for a smooth consistency that is easy to spread and clean.
|
Prism? Ultimate Performance grout sets a new standard in cement-based grout technology. Prism's calcium aluminate cement based formula offers consistent color with no shading regardless of tile type, temperature or humidity and it will not effloresce. The rapid setting formula results in high early strength and dense joints for the highest stain resistance in grout joints up to 1/2 in. A unique blend of lightweight recycled glass and fine aggregate sand allows for a smooth consistency that is easy to spread and clean.
|
Prism? Ultimate Performance grout sets a new standard in cement-based grout technology. Prism's calcium aluminate cement based formula offers consistent color with no shading regardless of tile type, temperature or humidity and it will not effloresce. The rapid setting formula results in high early strength and dense joints for the highest stain resistance in grout joints up to 1/2 in. A unique blend of lightweight recycled glass and fine aggregate sand allows for a smooth consistency that is easy to spread and clean.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prism? Ultimate Performance grout sets a new standard in cement-based grout technology. Prism's calcium aluminate cement based formula offers consistent color with no shading regardless of tile type, temperature or humidity and it will not effloresce. The rapid setting formula results in high early strength and dense joints for the highest stain resistance in grout joints up to 1/2 in. A unique blend of lightweight recycled glass and fine aggregate sand allows for a smooth consistency that is easy to spread and clean.
|
Prism? Ultimate Performance grout sets a new standard in cement-based grout technology. Prism's calcium aluminate cement based formula offers consistent color with no shading regardless of tile type, temperature or humidity and it will not effloresce. The rapid setting formula results in high early strength and dense joints for the highest stain resistance in grout joints up to 1/2 in. A unique blend of lightweight recycled glass and fine aggregate sand allows for a smooth consistency that is easy to spread and clean.
|
Ultimate performing lightweight mortar protects against cracks. Offers the ultimate in bond strength for the most demanding installation requirements with the flexibility to withstand horizontal substrate movement. Formulated with CustomLite? technology, it's 40% lighter than other mortars, providing excellent handling characteristics and offers non-sag, non-slip installation on walls. Diverse in application, it is capable of thin set or medium bed use up to 3/4 in thick on horizontal surfaces after beat in. Non-slump, medium bed features provide the ultimate support for large format tile and stone. Formulated with premium white cements and select recycled content for a white backdrop for the delicate installation of hard to bond glass tile. A 30 lb bag covers the same area as a 50 lb bag of traditional mortar. Use for interior or exterior floors, countertops and walls. Formulated with recycled material, contributes to LEED? certification. Exceeds ANSI A118.4TE, A118.15TE and A118.11 without the need for additives.
|
|
|
