|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Adjustable Duct Clamp, 5 to 6 in, Nylon
|
Imperial Worm Gear Clamp, 5 in Duct, 40 lb Weight Capacity, Metal
|
Imperial Worm Gear Clamp, 6 in Duct, 40 lb Weight Capacity, Metal
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dundas Jafine's metal worm gear clamps are ideal for use with semi-rigid or rigid aluminum ducts. They are made of heavy-duty galvanized steel and are ideal for fastening ducts to aluminum pipes or elbows.
|
DUNDAS JAFINE's metal worm gear clamps are ideal for use with semi-rigid or rigid aluminum ducts. They are made of heavy-duty galvanized steel and are ideal for fastening ducts to aluminum pipes or elbows.
|
Dundas Jafine's aluminum tension clamps are ideal for use with flexible or semi-rigid ducts. These clamps open and close with pressure, requiring no tools for installation or use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dundas Jafine ProVent? exhaust caps feature a louver damper system that helps to prevent cold air backdraft, snow or rain from entering the home. The louvers are cammed to allow for easy pivoting and to help prevent sticking. Additional features include a recessed caulk line to assist in maintaining a clean caulking application. All ProVent? products have a UV-resistant coating to prevent the cap from discoloring and are paintable to match the exterior of your home.
|
Imperial Adjustable Elbow, 4 in, Aluminum
|
Imperial Adjustable Elbow, 3 in, Aluminum
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Stack Head Elbow, 4 in Connection, Plastic, Gray, Ceiling, Wall Mounting, Suitable for: 4 in Air Diffuser
|
DUNDAS JAFINE's aluminum snap lock pipe can be used for venting most types of heating units. This product features an easy to close snap lock system for easy opening and closing of the pipe and is available in various sizes. This product is 0.012 in thick and will not meet most building codes for in wall use.
|
Dundas Jafine's metal worm gear clamps are ideal for use with semi-rigid or rigid aluminum ducts. They are made of heavy-duty galvanized steel and are ideal for fastening ducts to aluminum pipes or elbows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Pest Guard, Plastic, White, 9 in Width, 8-1/4 in Height, 5-1/4 in Depth, Suitable for: 3 to 4 in Dryer
|
Imperial Vent Hood, Duct Size: 4 in, Hood Material: Plastic, Hood Color: White
|
DUNDAS JAFINE's ProClean appliance brush is ideal for cleaning around your household appliances as well as inside your dryer's lint trap. The tapered design allows you to clean under your stove and refrigerator as well as the clean the refrigerator coils to help keep it running cooler and more efficient. The brush can also be used to easily remove lint that gets that gets trapped deep inside the clothes dryer's lint trap cavity. The ProClean appliance brush has a comfortable wooden handle and an overall length of 27 in with a 12 x 2 in tapered nylon brush head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Vent Cap, Plastic, White, 4 in L Dimensions, Includes: 3 in Crimped Mounting Pipe
|
The Ezconnect dryer duct to wall connector provides a secure and stable connection of the dryer to the wall. It simplifies dryer maintenance and overall safety by providing a simple, easy and quick access point to the dryer duct for cleaning of lint and debris on a regular basis. This product is easy to install and connects to all types of flexible and semi-rigid ducts. The innovative threading system allows for easy attachment to duct with no clamps or tools required.
|
Imperial Vent Reducer, Aluminum, 4 to 3 in Dia
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Reducer/Increaser, 4 to 3 in, Aluminum
|
Imperial Flexible Foil Duct, Insulated/Non Insulated: Non-Insulated, Aluminum, 4 in OD, 8 ft L, Includes: (2) Tension Clamps
|
Imperial Semi-Rigid Air Duct,-20 to 435 deg F, Insulated/Non Insulated: Non-Insulated, Aluminum, 4 in OD, 8 ft L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Flexible Transition Duct, Aluminum, 4 in OD, 8 ft Length, Suitable for: Electric, Gas Clothes Dryers
|
Dundas Jafine's soffit dryer vent allows for the dryer to be exhausted through the soffit panel, instead of traditional wall venting. The front damper opens when the dryer is turned on to exhaust the air and remains closed when the dryer is off, acting as a guard against pests and rodents from entering the duct. Like many of our other products, the soffit dryer vent cap has a UV-resistant coating to prevent the cap from discoloring and is paintable to match the soffit of your home.
|
Imperial Dryer Connector Elbow, 4 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is totally non-combustible with a maximum operating temperature of 435 deg F. Dundas Jafine is now pleased to offer a new UL Listed and Marked version of the semi-rigid aluminum duct. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
The semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is totally non-combustible with a maximum operating temperature of 435 deg F. Dundas Jafine is now pleased to offer a new UL Listed and Marked version of the semi-rigid aluminum duct. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
The semi-rigid aluminum duct is ideal for applications where code requires an all aluminum product. This duct is totally non-combustible with a maximum operating temperature of 435 deg F. DUNDAS JAFINE is now pleased to offer a new UL Listed and Marked version of the semi-rigid aluminum duct. This particular duct is UL2158A listed and marked and can be used in applications where the dryer manufacturer calls for a UL version of an all aluminum product. The UL duct is thicker than the standard version and new manufacturing technology incorporated into the duct allows for easy rotation and therefore more durable handling of the duct by the contractor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Imperial Louvered Vent Hood, Duct Length: 4 in, Duct Material: Aluminum, Plastic Hood, White Hood
|
Imperial Louvered Vent Hood with Guard, 4 in Dia Duct, 4 in Duct Length, Plastic Hood, Brown Hood, 7.1 in Hood Width, Hood Height: 7.1 in, Hood Depth: 2.6 in, 4 in Dia x 10.2 in H Overall
|
Imperial Transition Duct, Aluminum, 4 in OD, 8 ft L, Includes: (2) Clamps
|
|
|
