Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > TOWING & TOP CARRIERS > TRAILER BALLS & HITCHES
Sort By:
1 2 3 4
PIN SAFETY 5/16 X 3IN PIN SAFETY 1/4 X 2-3/4IN CLIP HITCH F/1/2 OR 5/8 ZN PIN
Curt safety pins go beyond the simple function of keeping your coupler latch secure. They are constructed from quality materials and have a universal design that allows them be used for a variety of purposes in your towing setup. Curt safety pins are made from solid steel to provide more than enough strength to keep your trailer coupler latched down tight. The zinc plating that we use to finish our safety pins offers excellent protection against rust and corrosion. This is necessary for any trailer because of its frequent exposure to the elements. The user-friendly design of our safety pins allows them to be easily handled while maintaining effective security. This safety pin has a pin diameter of 5/16 in. Curt safety pins can also be purchased with a 12 in chain attachment to mount onto your trailer coupler and prevent the safety pin from being misplaced. Use Curt safety pins for securing trailer couplers, jacks, caster wheels and more. When you couple your trailer to your vehicle, nuts and bolts just do not cut it. Secure your towing equipment right with a safety pin from Curt. Curt safety pins go beyond the simple function of keeping your coupler latch secure. They are constructed from quality materials and have a universal design that allows them be used for a variety of purposes in your towing setup. Curt safety pins are made from solid steel to provide more than enough strength to keep your trailer coupler latched down tight. The zinc plating that we use to finish our safety pins offers excellent protection against rust and corrosion. This is necessary for any trailer because of its frequent exposure to the elements. The user-friendly design of our safety pins allows them to be easily handled while maintaining effective security. The job of a hitch pin is incredibly important in towing and for this reason, CURT hitch pins and clips are made to be of the utmost quality, providing you with reliable security for your trailer and cargo. This three-pack of hitch clips offers a universal design. They fit either 1/2 in or 5/8 in hitch pins with a hole or groove attachment style and they keep the hitch pin securely set in place in your receiver tube. Each clip is covered in a zinc finish for long-lasting corrosion resistance.
PIN HITCH ZN 1/2IN 1-1/4IN RCV HITCH PIN 1/2IN PIN HITCH ZINC 5/8IN 2IN RCVR
The job of a hitch pin is incredibly important in towing and for this reason, CURT hitch pins and clips are made to be of the utmost quality, providing you with reliable security for your trailer and cargo. CURT 1/2 in hitch pins measure a full 1/2 in Dia and are constructed from solid steel. This helps ensure they have the strength they need to serve your towing needs. This 1/2 in hitch pin features a zinc finish and comes with a standard retainer hole to accept the included clip. All CURT 1/2 in pins come with a 105 deg bend, making them easier to handle and operate when mounting your ball mount. 1/2 in hitch pins will fit any CURT ball mount or hitch-mounted accessory with a 1-1/4 in shank. Vulcan Hitch Pin, 1/2 in Pin Diameter, 4 in Overall Length, Steel, Zinc, Silver When you mount a ball mount on your trailer hitch, you expect it to stay put. Whatever type of load you are hauling, having towing equipment that can work as hard as you do is a must. For all types of heavy-duty towing, CURT 5/8 in hitch pins and clips pack a little extra punch. We make our 5/8 in hitch pins out of solid steel and coat them in one of four finish options. All of these finishes offer excellent resistance to rust and corrosion for long-lasting, smooth operation. CURT hitch pins are also constructed with a 105 deg bend, creating a useful handle for a better grip and allowing the pin to stay securely engaged in the trailer hitch and ball mount. This particular 5/8 in hitch pin features a zinc finish and comes with a standard retainer hole to accept the included clip. It provides reliable installation for any ball mount or hitch-mounted accessory with a 2 in shank, making it the perfect fit for Class 3, 4 and 5 trailer hitches.
PIN HITCH ZINC 5/8IN LINK QUICK 1760LB 5/16IN HITCH PIN 5/8IN
When you mount a ball mount on your trailer hitch, you expect it to stay put. Whatever type of load you are hauling, having towing equipment that can work as hard as you do is a must. For all types of heavy-duty towing, Curt 5/8 in hitch pins and clips pack a little extra punch. We make our 5/8 in hitch pins out of solid steel and coat them in one of four finish options. All of these finishes offer excellent resistance to rust and corrosion for long-lasting, smooth operation. Curt hitch pins are also constructed with a 105 deg bend, creating a useful handle for a better grip and allowing the pin to stay securely engaged in the trailer hitch and ball mount. This particular 5/8 in hitch pin features a zinc finish and comes with a standard retainer hole to accept the included clip. Curt 5/8 in hitch pins and clips are ready to work. They provide reliable installation for any ball mount or hitch-mounted accessory with a 2 in or 2-1/2 in shank, making them the perfect fit for Class 3, 4 and 5 trailer hitches. Curt quick links are an extremely versatile and reliable tool to help you get to your destination and go a little further once you get there. A quick-link is essentially a hook that is able to be fastened into a closed loop. This means it can be linked onto any d-ring or tie-down like a hook and just as easily secured like a seamless link in a chain. Curt quick links feature a special threaded end and barrel screw that allow them to be dependable and convenient. The threaded link requires no tools for tightening or loosening, though it does feature a hex shape that can accept a wrench for an extra tight hold. Quick link hooks can be used to connect rope, cable and chain and they are the ideal safety accessory to maximize the security of your safety chains and trailer. Their list of possible applications also goes well beyond towing, giving you a reliable connection for rock climbing, boating, camping, setting up a swing or hammock, leashing the dog, repairing chain, fastening down cargo and more. To make sure our quick links are fit to face the outdoors and all of your undertakings, we construct them from heat-treated steel and give them a zinc-plated finish for durability and rust-resistance. These Curt quick links feature a max load capacity of 1760 lb and features a 5/16 in Dia link. Vulcan Hitch Pin, 5/8 in Pin Diameter, 5 in Overall Length, Steel, Zinc, Silver
COVER TUBE HITCH RUBBER 2IN PIN HITCH HD W/GRV ZINC 5/8IN LANYARD SWITCH BREAKAWAY TRLR
If you own a vehicle with a trailer hitch, you know how quickly the receiver tube can get built up with dirt, debris and road grime. It does not take long before inserting a ball mount or hitch-mounted accessory into your trailer hitch becomes more difficult than it should ever have to be. With enough time and moisture exposure, the inside of a receiver tube can become seized up with rust, making it very difficult to use. Keep your trailer hitch's receiver tube clean and protected when not towing with one of Curt's attractive and durable tube covers. This Curt 2 x 2 in receiver tube cover is constructed from quality rubber and mounts on your trailer hitch with a friction fit, meaning no hitch pin or clip is required. At Curt, we want to give you a complete towing solution and that includes providing you with the products necessary to maintain your towing equipment. Defend your trailer hitch from the harsh elements with a Curt trailer hitch cover. 3 x 3 in receiver hitches are built for towing heaviest of trailers and a hitch pin with the proper size and rating is essential for safe towing. This heavy-duty hitch pin has been stringently tested at our Detroit engineering facility to safely tow 21,000 lb. It easily secures heavy-duty ball mounts or other hitch-mounted accessories in the receiver tube. It is constructed from high-strength steel and has a rust-resistant zinc-plated finish for long-lasting durability. This heavy-duty hitch pin is made extra-long and has a 5/8 in diameter to fit any 3 x 3 in receiver with a 5/8 in pin hole. It also features an included retainer clip and a grooved tip for easy clip access from any angle. For any and all types of trailers with electric trailer brakes, a curt breakaway kit provides you with the equipment you need to be prepared. We offers three different complete breakaway systems to accommodate various trailer sizes and meet your specific towing needs. All of our breakaway kits are tested for your safety and meet DOT requirements for holding and breakaway situations. This breakaway lanyard is made to fit the Curt breakaway switch #52010. With a 48 in cable and high-temp nylon pull, it offers reliable activation of your trailer brakes, when used in combination with the breakaway switch and complete breakaway kit. The 48 in length accommodates most vehicle trailer combinations. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a curt breakaway kit.
BALL TRLR 1-7/8X3/4IN EXTL LATCH COUPLER STL 9/16X2-3/4IN BALL TRLR 2X3/4IN EXTL
Dynaline Trailer Ball, Shank Length: 1-1/2 in, Shank Diameter: 3/4 in, Ball Diameter: 1-7/8 in, Steel, Chrome-Plated, Gross Towing Weight: 2000 lb The Master Lock 2847DAT features a stainless steel trailer coupler latch lock, adjustable 9/16 to 2-3/4 in long for maximum application flexibility. The water tight cap provides additional protection from moisture and dirt. The limited lifetime warranty provides peace of mind from a brand you can trust. Dynaline Trailer Ball, Shank Length: 1-1/2 in, Shank Diameter: 3/4 in, Ball Diameter: 2 in, Steel, Chrome-Plated, Gross Towing Weight: 3500 lb
BALL HITCH TRACTOR LWN 1-7/8IN BALL TRLR 1-7/8X3/4IN INT BALL TRLR 2-7/8X3/4IN EXTL
Whether you are towing gear out into the field or just getting some yardwork done, Curt ATV tow balls and lawn tractor hitch balls are the ideal addition to your four wheeler, side-by-side or lawnmower. They feature industry-standard dimensions, a tested towing capacity and a durable construction to withstand the outdoor elements. This Curt ATV tow ball / lawn tractor hitch ball has a 1-7/8 in ball Dia. This standardized dimension will fit virtually any 1-7/8 in trailer coupler, including small utility trailers, gear haulers, landscaping trailers, teardrop campers and much more (capacity limited to lowest-rated towing component). The trailer ball comes with a 1-3/4 x 5/8 in shank to easily and securely drop into a lawn tractor tongue or ATV tongue or even a ball mount. It fastens securely with the included nut and lock washer. This Curt hitch ball is rated to tow up to 2000 lb GTW. This rating is stringently tested according to U.S. VESC V-5 specifications to ensure safety and dependability. The trailer ball is constructed from hot-forged steel for solid strength and it features fine threads on the shank to increase the holding strength. This trailer ball is ideal for ATVs, UTVs and lawn tractors alike. However, remember that the 2000 lb rating is limited to the lowest-rated towing component. To help the Curt ATV tow ball or lawn tractor hitch ball stand up to the elements, it comes with a durable finish. The hot-forged steel is shielded in a bright chrome plating that helps resist rust and corrosion in spite of rain, dirt, mud and snow. Whether you're embarking on a deep-woods hunt or working hard on the landscaping, this trailer ball is engineered to keep up and offer reliable towing. Dynaline Trailer Ball, Shank Length: 1-3/4 in, Shank Diameter: 3/4 in, Ball Diameter: 1-7/8 in, Steel, Chrome, Gross Towing Weight: 2000 lb Dynaline Trailer Ball, Shank Length: 1-1/2 in, Shank Diameter: 3/4 in, Ball Diameter: 1-7/8 in, Steel, Chrome-Plated, Gross Towing Weight: 2000 lb
BALL TRLR 1-7/8X3/4IN EXTL HITCH BALL 1-7/8X3/4X1-1/2IN L HITCH BALL 1-7/8X3/4X2-3/8IN L
Dynaline Trailer Ball, Shank Length: 3-1/4 in, Shank Diameter: 3/4 in, Ball Diameter: 1-7/8 in, Steel, Chrome-Plated, Gross Towing Weight: 2000 lb Hitch Ball dimensions - Shank Length: 1-1/2 in, Shank Diameter: 3/4 in, Ball Diameter: 1-7/8 in. Hitch Ball dimensions - Shank Length: 2-3/8 in, Shank Diameter: 3/4 in, Ball Diameter: 1-7/8 in.
HITCH BALL 2X3/4 DIAX1-1/2IN L BALL HITCH TRACTOR LAWN 2IN BALL TRLR 2X3/4IN EXTL
Hitch Ball dimensions - Shank Length: 1-1/2 in, Shank Diameter: 3/4 in, Ball Diameter: 2 in. Whether you are towing gear out into the field or just getting some yardwork done, Curt ATV tow balls and lawn tractor hitch balls are the ideal addition to your four wheeler, side-by-side or lawnmower. They feature industry-standard dimensions, a tested towing capacity and a durable construction to withstand the outdoor elements. This Curt ATV tow ball/lawn tractor hitch ball has a 2 in ball Dia. This standardized dimension will fit virtually any 2 in trailer coupler, including small utility trailers, gear haulers, landscaping trailers, teardrop campers and much more (capacity limited to lowest-rated towing component). The trailer ball comes with a 1-3/4 x 5/8 in shank to easily and securely drop into a lawn tractor tongue or ATV tongue or even a ball mount. It fastens securely with the included nut and lock washer. This Curt hitch ball is rated to tow up to 2000 lb GTW. This rating is stringently tested according to U.S. VESC V-5 specifications to ensure safety and dependability. The trailer ball is constructed from hot-forged steel for solid strength, and it features fine threads on the shank to increase the holding strength. This trailer ball is ideal for ATVs, UTVs and lawn tractors alike. However, remember that the 2000-pound rating is limited to the lowest-rated towing component. To help the Curt ATV tow ball or lawn tractor hitch ball stand up to the elements, it comes with a durable finish. The hot-forged steel is shielded in a bright chrome plating that helps resist rust and corrosion in spite of rain, dirt, mud and snow. Whether you're embarking on a deep-woods hunt or working hard on the landscaping, this trailer ball is engineered to keep up and offer reliable towing. Dynaline Trailer Ball, Shank Length: 1-1/2 in, Shank Diameter: 3/4 in, Ball Diameter: 2 in, Steel, Chrome-Plated, Gross Towing Weight: 3500 lb
HITCH BALL 2X3/4 DIAX2-3/8IN L BALL TRLR CHRM 1-7/8X3/4X1-5/8 SLEEVE REDUCER 2-1/2 X 2IN
Hitch Ball dimensions - Shank Length: 2-3/8 in, Shank Diameter: 3/4 in, Ball Diameter: 2 in. Curt 1-7/8 in trailer balls are constructed from high-strength steel to match the towing power of your Class 1 or Class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches your coupler size is absolutely essential. At Curt, our trailer balls are engineered to be precisely fitted. When we stamp 1-7/8 in into the top of each hitch ball, we actually mean 1-7/8 in. This Curt tow ball features a ball capacity of 2000 lb. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers and some recreational vehicle haulers. As with any trailer, be sure that your towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4 in shank Dia, a 1-5/8 in shank length, 0 in of rise and a nickel-chrome finish to protect against corrosion and wear. Like all Curt trailer balls, our 1-7/8 in balls are tested for your safety and meet all US VESC specifications. Curt hitch adapters can be used for many different purposes when hitching up a trailer. Whether a ball mount shank is too small or too large to fit into a receiver tube, a Curt adapter can make up the difference. Our adapters are built with exceptional strength and designed to be precisely fitted for their application. We carry trailer hitch adapters to accommodate both receiver tube openings and shanks of 1-1/4 in, 2 in and 2-1/2 in dimensions. Curt adapters also come in various lengths to allow more clearance for a cargo carrier, bike rake or spare tire. This Curt reducer sleeve adapter converts a 2-1/2 x 2-1/2 in receiver tube opening to a 2 x 2 in opening. It installs easily and is compatible with virtually any 2-1/2 x 2-1/2 in hitch. Its gross trailer weight capacity and tongue weight capacity are limited to the hitch. All Curt adapters are constructed using our quality manufacturing processes. We CNC-form each unit, weld it together using advanced robotic systems and then mechanically descale every surface to make each adapter smooth to accept a finishing coat. To finish off this adapter, we give it a durable black carbide powder coat finish to ensure it has excellent rust, chip and UV resistance.
BALL TRLR CHRM 1-7/8X3/4-2-1/8 BALL TRLR CHRM 2INX3/4X1-3/4IN BALL TRLR 1-7/8X3/4IN INT
Curt 1-7/8 in trailer balls are constructed from high-strength steel to match the towing power of your class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches your coupler size is absolutely essential. At Curt, our trailer balls are engineered to be precisely fitted. When we stamp 1-7/8 in into the top of each hitch ball, we actually mean 1-7/8 in. This Curt tow ball features a ball capacity of 2000 lb. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers and some recreational vehicle haulers. As with any trailer, be sure that your towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4 in shank diameter, a 2-1/8 in shank length, 0 in of rise and a nickel chrome finish to protect against corrosion and wear. Like all Curt trailer balls, our 1-7/8 in balls are tested for your safety and meet all U.S. VESC specifications. Out of the monotony comes one name that rises above all others. Curt trailer balls are designed for strength, ease of use and, ultimately, to get you to your destination without hassle. Curt 2 in trailer hitch balls are constructed from quality steel and are made with precision to fit your 2 in trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers such as utility trailers, boat trailers, campers, livestock trailers and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount, and are the ideal choice for most pickup trucks and SUVs (note: never exceed the lowest weight capacity of any towing component i.e. The vehicle, hitch, trailer, etc). This particular 2 in trailer ball offers a ball capacity of 3500 lb it features a 3/4 in shank Dia, a 1-3/4 in shank length, 0 in of rise and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2 in trailer ball also offers an added measure of holding strength and provides smooth installation and torqueing. To give you peace of mind while towing to that next destination, we also carefully test our trailer balls and ensure that each one meets U.S. VESC specifications. Dynaline Trailer Ball, Shank Length: 1-3/4 in, Shank Diameter: 3/4 in, Ball Diameter: 1-7/8 in, Steel, Chrome-Plated, Gross Towing Weight: 2000 lb
   
 
1 2 3 4