Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > PERCUSSION BITS
Sort By:
1 2 3
BIT MASONRY PERCUSSION 1/8X3IN BIT DRL MSNRY 3/16IN 3-1/2IN BIT MASONRY PERCSN 3/16IN
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Task Drill Bit, Percussion, 3/16 in Dia, Shank Type: Flat, Steel, 3-1/2 in OAL, Applicable Materials: Brick, Concrete, Stone, Suitable for: Tapcon Installation Tools Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
BIT DRL MSNRY 5/32IN 3-1/2IN BIT DRL MSNRY 3/16IN 4-1/2IN BIT DRL MSNRY 3/16IN 5-1/2IN
Task Drill Bit, Percussion, 5/32 in Dia, Shank Type: Flat, Steel, 3-1/2 in OAL, Applicable Materials: Brick, Concrete, Stone, Suitable for: Tapcon Installation Tools Task Rotary Drill Bit, Percussion, 3/16 in Dia, Shank Type: Flat, Steel, 4-1/2 in OAL, Applicable Materials: Brick, Concrete, Masonry, Stone, Suitable for: Tapcon Anchors Task Drill Bit, Percussion, 3/16 in Dia, Shank Type: Flat, Steel, 5-1/2 in OAL, Applicable Materials: Brick, Concrete, Stone, Suitable for: Tapcon Installation Tools
BIT MASONRY 5/32X4.5IN BIT MASONRY PERCUSSION 1/4X4IN BIT PERCUSSION MSNRY 5/32IN
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work, brick, cement, tile, slate and cinder block. Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Task Drill Bit, Percussion, 5/32 in Dia, Flute Type: Spiral, Cutting Edge Material: Carbide, Carbon Steel, Applicable Materials: Ceramic, Masonry, Stone
BIT HAMMER PERC MSNRY 1/8X3IN BIT PERCUSSION MSNRY 3/16IN BIT HAMMER PERC MSNRY 3/16X3IN
Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Task Rotary Drill Bit, Percussion, 3/16 in Dia, Flute Type: Spiral, Cutting Edge Material: Carbide, Carbon Steel, Applicable Materials: Brick, Ceramic Tile, Concrete, Masonry, Stone Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage.
BIT HAMMER MSNRY 1/8X1-1/2X3IN HAMMER BIT 5/32X4X6IN MSNRY HAMMER BIT 3/16X2X3-1/2 MSNRY
Bit will fit all hammer drills with 3 jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3 jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Bit will fit all hammer drills with 3 jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
BIT HAMMER MASONRY 1/4X2X4IN BIT MASONRY PERCUSSION 1/4X6IN BIT MASONRY PRCUSSION 5/16X6IN
Bit will fit all hammer drills with 3 jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work. Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work.
BIT DRL MSNRY 5/32IN 4-1/2IN BIT DRL HMR 5/32IN 4-1/2IN BIT HAMMER MSNRY 3/16X4.5X6IN
Task Rotary Drill Bit, Percussion, 5/32 in Dia, Shank Type: Flat, Steel, 4-1/2 in OAL, Applicable Materials: Brick, Concrete, Masonry, Stone, Suitable for: Tapcon Anchors These drill bits has been specifically selected for the installation of COBRATAP, our concrete screws 5/32 in for the 3/16 in screws and 3/16 in for the 1/4 in screws, with a flat side on the shank for use with the quick load adaptor. Bit will fit all hammer drills with 3 jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.
BIT HAMMER 5/16X2-1/2X4-3/4IN BIT DRL MSNRY 5/32IN 5-1/2IN BIT DRL HMR 3/16IN 4-1/2IN
Bit will fit all hammer drills with 3 jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. Task Rotary Drill Bit, Percussion, 5/32 in Dia, Shank Type: Flat, Steel, 5-1/2 in OAL, Applicable Materials: Brick, Concrete, Masonry, Stone, Suitable for: Tapcon Anchors Cobra Anchors Drill Bit, 3/16 in Dia, Quick Change Shank: Yes, Metal, 4-1/2 in OAL, Applicable Materials: Concrete
BIT DRL HMR 3/16IN 3-1/2IN BIT DRL HMR 5/32IN 3-1/2IN BIT HAMMER PERC MSNRY 3/16X6IN
Used in applications such as drilling in brick, cinder block and tile. Used in applications such as drilling in brick, cinder block and tile. Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage.
BIT HAMMER PERC MSNRY 5/16X6IN BIT HAMMER MASONRY 1/4X4X6IN Tapcon BX51910 Twist Drill Bit
Power through masonry, concrete, rock and more with DeWALT? hammer drill bits. Featuring rock carbide tips that maximize surface contact for extended bit life and a 4-flute design that cleans debris while you work. Three flats on the shank eliminate bit slippage. Bit will fit all hammer drills with 3 jaw or Jacobs chuck and features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications. The standard drill bit is universally used for drilling smaller pilot holes in concrete, block and brick and works seamlessly with Tapcon anchors. The SDS drill bit is designed for heavy-duty use in rotary hammer drills without any slippage, providing productive, high-torque drilling. The carbide tip easily drives through concrete and masonry.
   
 
1 2 3