Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > SCREW PILOTS- COUNTERSINKS
Sort By:
1
BIT COUNTERSINK 1/4IN BIT PLT HEX SHNK NO6 BIT PLT HEX SHNK NO8
Task Drill Bit, Countersink, 1/4 in Dia, Number of Flutes: 5, Shank Type: Hex, Shank Diameter: 1/4 in, HSS, Applicable Materials: Aluminum, Brass, Copper, Iron, Plastic, Steel, Wood Task Screw Drill Bit, #6 Dia, Shank Type: Hex, Quick Change Shank: Yes, Shank Diameter: 1/4 in, Point Type: Pilot, Applicable Materials: Composition Board, Plastic, Wood, Suitable for: TASK and Similar 1/4 in Quick-Change Adapters Task Screw Drill Bit, #8 Dia, Shank Type: Hex, Quick Change Shank: Yes, Shank Diameter: 1/4 in, Point Type: Pilot, Applicable Materials: Composition Board, Plastic, Wood, Suitable for: TASK and Similar 1/4 in Quick-Change Adapters
BIT PLT HEX SHNK NO10 BIT PLT HEX SHNK NO12 BIT COUNTERSINK 5/8IN
Task Screw Drill Bit, #10 Dia, Shank Type: Hex, Quick Change Shank: Yes, Shank Diameter: 1/4 in, Point Type: Pilot, Applicable Materials: Composition Board, Plastic, Wood, Suitable for: TASK and Similar 1/4 in Quick-Change Adapters Task Pilot Drill Bit, Shank Type: Hex, Shank Size: 1/4 in, Wood, Suitable for: Task 1/4 in Quick Change Adapters Task Drill Bit, Countersink, 5/8 in Dia, Number of Flutes: 5, Shank Diameter: 1/4 in, Point Angle: 82 deg, HSS, Applicable Materials: Aluminum, Brass, Copper, Iron, Non-Ferrous Metal, Plastic, Steel, Wood
BIT COUNTERSINK 3/8IN BIT COUNTERSINK 1/2IN BIT COUNTERSINK 3/4IN
Task Drill Bit, Countersink, 3/8 in Dia, Number of Flutes: 5, Shank Diameter: 1/4 in, Point Angle: 82 deg, HSS, Applicable Materials: Aluminum, Brass, Copper, Iron, Non-Ferrous Metal, Plastic, Steel, Wood Task Drill Bit, Countersink, 1/2 in Dia, Number of Flutes: 5, Shank Diameter: 1/4 in, Point Angle: 82 deg, HSS, Applicable Materials: Aluminum, Brass, Copper, Iron, Non-Ferrous Metal, Plastic, Steel, Wood Task Drill Bit, Countersink, 3/4 in Dia, Number of Flutes: 5, Shank Diameter: 1/4 in, HSS, Applicable Materials: Aluminum, Brass, Copper, Iron, Plastics, Steel, Wood
BIT DRILL CSINK REPL 11/64IN BIT DRILL CSINK REPL 3/16IN BIT COUNTERSINK TAPERED NO 4
Drill, countersink and counterbore in one step. Four-cutter countersink and tapered drill bit provide speed and finish. Drill, countersink and counter bore in one step with DeWALT? countersinks. Each 4-cutter, tapered countersink delivers great speed with a professional finish. Ideal for both soft and hard woods. Replacement tapered bits are available. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4 in quick change shank reduces slipping in standard chucks and is compatible with all 1/4 in quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth.
BIT COUNTERSINK TAPERED NO 6 BIT DRILL CSINK NO6 X 9/16IN BIT DRILL CSINK REPL 9/64IN
Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4 in quick change shank reduces slipping in standard chucks and is compatible with all 1/4 in quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth. Milwaukee?? #6 countersink features a 9/16 in drill bit. The bits pre-drill and countersink. The 1/4 in quick change hex shanks allow for quick size changes. The drill bit length is adjustable to allow for precise depth control. Drill, countersink and counter bore in one step with DeWALT? countersinks. Each 4-cutter, tapered countersink delivers great speed with a professional finish. Ideal for both soft and hard woods. Replacement tapered bits are available.
BIT DRILL CSINK NO8 X 11/64IN BIT DRILL CSINK NO10 X 3/16IN BIT COUNTERSINK TAPERED NO 12
Our #8 countersink features a 11/64 in drill bit. The pre-drill and countersink bits are designed for use in Milwaukee?? drill drivers. The 1/4 in quick change hex shanks allow for quick size changes. The 1/8 in hex drill bit length is adjustable to allow for precise depth control. Our #10 countersink features a 3/16 in drill bit. The pre-drill and countersink bits are designed for use in Milwaukee?? drill drivers. The 1/4 in quick change hex shanks allow for quick size changes. The 1/8 in hex drill bit length is adjustable to allow for precise depth control. Tapered drill with widened flutes for drilling fast, clean pilot holes. 1/4 in quick change shank reduces slipping in standard chucks and is compatible with all 1/4 in quick change chucks, including impact drills. Adjustable four-cutter counterbore cuts and clears chips quicker for fast, smooth countersinking. Counter bore attaches to flats on shank with two hex screws for a secure fit and can be adjusted for controlled pilot hole depth.
BIT COUNTERSINK RAPIDLOAD NO 6 BIT COUNTERSINK RAPIDLOAD NO 8 BIT COUNTERSNK RAPIDLOAD NO 10
Drill, countersink and counterbore in one step. Four-cutter countersink and tapered drill bit provide speed and finish. Drill, countersink and counterbore in one step. Four-cutter countersink and tapered drill bit provide speed and finish. Drill, countersink and counter bore in one step with DeWALT? countersinks. Each 4-cutter, tapered countersink delivers great speed with a professional finish. Ideal for both soft and hard woods. Replacement tapered bits are available.
BIT COUNTERSNK RAPIDLOAD NO 12 BIT COUNTERSINK RAPIDLOAD 3PC SET BIT 4PC NO6 NO8 NO10 NO12
Drill, countersink and counter bore in one step with DeWALT? countersinks. Each 4-cutter, tapered countersink delivers great speed with a professional finish. Ideal for both soft and hard woods. Replacement tapered bits are available. Drill, countersink and counterbore in one step. Four cutter countersinks and replaceable tapered drill bits provide great speed and finish. Universal 1/4 in hex shank locking system prevents slipping. Includes #6 (9/64 in), #8 (11/64 in) and #10 (3/16 in) countersinks. Task Screw Pilot Drill Bit Set, Carbon Steel, Number of Pieces: 4, Suitable for: 1/4 in Quick Change Adapters, Includes: #12, #10, #8, #6 Bits
   
 
1