|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits on Acme doors. Adjustable stamped steel bracket and self-lubricating nylon bushing. 2-15/16 in L x 15/16 in D x 1-3/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
N 6565 is a white nylon floor guide for a single 1-3/8 in thick door. Often used on pocket doors as well as bi-pass door systems. Used by several door manufacturers.
|
Onward Bi-Fold Door Slide Guide, White, Suitable for: Bi-Fold Door
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Onward Door Mechanism Track, 29-3/4 in L, Steel, White
|
Renin Bi-Fold Door Aligner, Steel, Zinc, Includes: Fasteners
|
N 6756 is a hardwood bi-fold door pull knob. It has a 1-3/4 in Dia knob and a 11/16 in Dia base. Used on solid wood bi-fold door panels, the large diameter knob is comfortable to use. It can be stained or painted to match. Fits up to a 1-3/8 in thick door.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits Acme 2900 Series bi-fold doors. Steel bracket mounts into top track. 1-15/16 in L x 3/4 in W overall.
|
N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
Renin Bi-Fold Door Track, 23-3/4 in L, Door Weight: 30 lb, Steel, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Onward Door Knob, Bi-Fold, Plastic, White, Dimensions: 24.6 mm L x 46 mm W, Includes: Nail, Screw
|
Onward Door Mechanism Track, 23-3/4 in L, Steel, White
|
N 6673 is a bottom mount pivot used by many bi-fold doors manufacturers. The 3/8 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6705 is a spring loaded, 3/4 in square glide or guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by Alliance Doors and many bi-fold door manufacturers.
|
1-1/4 x 2 in, universal bi-fold door aligner, yellow zinc plated finish.
|
Onward Door Bottom Pivot, Dimensions: 3/8 in Dia, Zinc
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6702 is a top mount bi-fold door pivot. Used by several door manufacturers, the 19/32 in spring-loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door.
|
Acme Top Pivot and Roller Guide, Base Diameter: 7/16 in
|
Renin Slide Guide, Plastic, White, Powder-Coated, Screw Mounting, Suitable for: BF103P Top Pivots and ACME Bi-Fold Track Doors
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Renin Door Bottom Pivot, Base Diameter: 7/16 in
|
1/4 in W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8 in OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2 to 2 in H.
|
N 6700 is a spring loaded, 1/4 in Dia steel pivot in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces bottom pivot/jamb bracket pivot used on tap in type hardware.
|
Fits on Cox doors for horizontal adjustments. Adjustable stamped steel bracket and nylon bushing. 2-7/8 in L x 7/8 in D x 1-5/16 in H overall. For 1 to 1-3/8 in Thick folding doors up to 50 lb. each. Includes two #8 x 3/4 in Phillips pan head screws and one #8 x 1-1/4 in Phillips flat head screw.
|
N 6539 is a 4 in long bi-fold door snugger that snaps into the center of the bi-fold door track. The guide pin (N 6545) is inserted between the two springs in the nylon snugger housing. As the door is closed, the snugger slides in the track and makes contact with the opposite set of doors. This applies pressure evenly between guide pins. This causes them to remain in the closed position until one of the sets is grabbed by the knob and pulled outward. Used on Acme bi-fold doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6701 is a Top mount bi-fold door pivot and guide. Used by Johnson Hardware and other door manufacturers, the spring loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door or it serves as a guide for the end door as it slides back and forth in the track. See N 6844 for the Pivot Bracket.
|
6583 is a top mount bi-fold door pivot. Used on Cox doors, the spring-loaded 1/4 in steel pin inserts into the top pivot bracket above creating a pivot point for the bi-fold door.
|
Renin Bi-Fold Door Hinge, Non-Mortise, Screw Mounting, Metal, Zinc, Suitable for: 1 in Thick Door Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Renin Jamb Bracket/Bottom Pivot, Metal, Zinc, Screw Mounting, Suitable for: 3/4 to 1-3/8 in Door Panels
|
National Hardware V391A Folding Door Aligner, Steel, Zinc
|
Onward Door Mechanism Track, 47-3/4 in L, Steel, White
|
|
|
